MultiFiber™ Pro Optical Power Meter and Fiber Test Kits
Product Highlights
The first MPO fiber tester to support both single mode and multimode MPO fiber certification.
- Automatic scanning and testing of all fibers in MPO connectors with “Scan All”
- Support for both Multimode and Singlemode MPO fiber trunks
- Eliminates the need for fan-out cords when testing MPO fiber trunks
- ROI Calculator
- Request a Demo
- Easy to interpret test results with minimal navigation View More >
PRODUCT NAVIGATION
Overview
Introducing the MultiFiber™ Pro Optical Power Meter and Fiber Test Kits.
MultiFiber Pro Optical Power Meter and Source is the first fiber tester that can certify MPO fiber trunks without the use of fan-out cords. This single mode and multimode MPO fiber testing kit eliminates the complexity of polarity issues, and it makes cassettes easier to test in the field. Whether using 10 Gbps preterminated MPO fiber trunks or planning for next-generation 40/100 Gbps Ethernet performance, data centers are standardizing on an MPO connector solution. Typical data center fiber installation means time-consuming, manual, and imprecise MPO validation. MultiFiber Pro Optical Power Meter and Source is 90 percent faster than single fiber cable certification because it measures power loss and validates polarity on 12 fibers in a single connector — reducing test time from weeks to days.
Features
The Scan All function in the MultiFiber Pro Power Meter automatically scans and tests all 12 fibers in MPO connectors – taking just 6 seconds to complete all loss or power measurements. This feature automates the certification of MPO terminated fibers and eliminates the time consuming and manual process of moving the fiber tester from fiber to fiber while using fan-out cords.
The simple purpose of any polarity scheme is to provide a continuous connection from the link’s transmitter to the link’s receiver. For array connectors, TIA-568-C.0 defines three methods to accomplish this: Methods A, B and C. Deployment mistakes are common because these methods require a combination of patch cords with different polarity types. The polarity measurement of MultiFiber Pro allows the user to test individual patch cords, permanent links and channels for correct polarity.
Equipped with MPO connector on both the Optical Power Meter and Light Source, it eliminates the use of costly and complicated fan-out cords to test MPO fibers.
Uncovered ports can put cabling, equipment and testers at risk for contamination and affect performance. Ensuring a covered connection on your tester can protect it from dirt and dust. MultiFiber Pro makes it easy by shuttering the MPO connector giving you greater test reliability and peace of mind.
The MultiFiber Pro is so successful at simplifying the task of simultaneously representing polarity, power and loss results for 12 fibers that the user interface is patent pending. The power meter enables the users to easily comprehend the measurement results of 12 fibers simultaneously. The light source identifies each fiber within the MPO connector that is being tested. Any individual measurement that fails the test limit is plainly identified to allow root-cause analysis. This powerful yet straightforward test set enables everyone to become a fiber testing expert and increases efficiency in testing data center projects.
One of the main problems in the data center is the ability to drill down to a single fiber during testing and troubleshooting. MultiFiber Pro can troubleshoot a single fiber within an MPO trunk and provide a single fiber test result. This ability increases MPO connector verification and troubleshooting flexibility with more precise, per-fiber data and reporting.
The MultiFiber Pro Power Meter stores up to 3,000 test results (or the equivalent of 250 MPO cables) internally which can be uploaded to a PC using the LinkWare™ 7 Cable Test Management Software. LinkWare 7 allows you to manage test results, edit cable ID’s, print professional reports and even export the data into spreadsheet formats.
MultiFiber Pro is available in several convenient kit configurations to meet all your cleaning, inspection and verification testing needs. Some kits include:
FI-7000 FiberInspector Pro with MPO tip and cleaning supplies
The FI-7000 is the ultimate inspection tool. It enables you to quickly inspect and certify fiber end-faces inside ports or patch cords. It’s 2-second automated PASS/FAIL eliminates human subjectivity and enables anyone to become a fiber inspection expert.
- Automated Pass/Fail acceptance testing of fiber end-faces
- Large touchscreen for pinch and zoom
- Graphical indication of problem areas due to contamination, pits, chips, and scratches
- Certify to industry standards - IEC 61300-3-35
- Eliminate human subjectivity from end-face measurements
- Includes MPO tip for inspection probe and MPO cleaner
Fiber Cleaning – Quick Clean™ Cleaners
Cleaning is critical. Fluke Networks’ Quick Clean Cleaners instantly clean fiber optic bulkhead connectors and end-faces. Just push the tool tip to engage cleaning action and pull back on the wheel – it’s that simple. The MPO Quick Clean Cleaner is bundled with the MultiFiber Pro kits to ensure that you have the best cleaning tool from the beginning.
Documents
MultiFiber Pro Case Study
Think Trunk Cables Don’t Need Testing? MultiFiber Pro Shows One Installation Contractor They Certainly Do
Challenge:
Issues with trunk cables can often sneak into an installation unrecognized. After all, this cable is generally pre-tested and certified, so it must be fine. That common perception was certainly shared by one East Coast-based installation contractor, who nevertheless was experiencing persistent issues with a particular project. In fact, the problem was so intractable that despite repeatedly examining, cleaning and re-testing the links with their OTDR unit, installers were unable to isolate the issue. And as a result, they were watching job profitability vanish in a haze of additional man-hours.
Results:
The company was put in touch with Fluke Networks, and quickly learned that, although the installers had the best fiber testing tools on the market, they weren’t the right ones. Moreover, it turned out that “pre-tested and certified” didn’t actually provide the guarantee they thought. Fluke Networks showed the contractor how the company’s MultiFiber Pro can rapidly troubleshoot the thorniest fiber trunk issues.
Gold Product Support
Gold Support for your MultiFiber Pro Optical Power Meter allows you to make the most of your MultiFiber Pro purchase while ensuring a higher return on your investment. You will minimize your downtime, receive faster trouble resolution and have total access to all support resources.
Keeping your MultiFiber Pro calibrated is critical to ensure accuracy when testing fiber. Our calibration processes are controlled and designed to certify that your MultiFiber Pro meets all published specifications. Typical turnaround time for a calibration is 5 working days. Your MultiFiber Pro will be calibrated to factory specifications (calibration certificate provided), upgraded with all of the latest software and firmware then cleaned and performance verified. In addition, all accessories that came with your MultiFiber Pro will be tested and replaced if faulty or defective.
If your MultiFiber Pro Optical Power Meter should fail and need repaired, you will receive a replacement unit to keep - all shipping paid by Fluke Networks.
Some accessories are essential to testing fiber. If any accessory that comes with your MultiFiber Pro model are qualified as defective or faulty by our technical assistance center, it will be replaced free of charge.
Extend the expertise of your staff. Gold Support includes priority access to our world-class Technical Assistance Center (TAC). Our centers in Seattle, WA and Eindhoven, NL employ a full staff of highly trained technical experts that are on call, including weekends and through the night, to answer complex troubleshooting questions, including GOLD only services such as: Test set-up and instrument configuration, Fiber testing and reference setting, Test results interpretation, including trace results analysis.
You’ll have an open door to valuable proprietary information we’ve gathered from helping customers over the years. It also includes helpful technical articles written by our experts.
Your membership qualifies you for “Members Only” promotions and programs. This includes product discounts, access to reconditioned equipment at special prices and other incredible values.
Ensure that you are getting the most out of your MultiFiber Pro Optical Power Meter with Gold Support Services.
