Home > Support > Knowledge Base
< Back Reset Filters
Search and Filter

Filtered Results

Case Study 5 - NEXT Fails on DTX CableAnalyzer due to a termination issue
Case Study 4 - Insertion Loss Fails on DTX CableAnalyzer due to lubricant
Case Study 3 - Return Loss Fails on DTX CableAnalyzer due to water in cable
Case Study 2 - NEXT Fails on DTX CableAnalyzer due to cable
Case Study 1 - Marginal NEXT Pass on a DTX CableAnalyzer
Cabling vendor submissions for Cable Types
Cable ID Creation - DTX CableAnalyzer
Battery - DTX CableAnalyzer
Basic setting up of the DTX CableAnalyzer for twisted pair cabling
Test times - DSX CableAnalyzer
Bad patch cord at main / remote reported on DTX CableAnalyzer
TCL (Transverse Conversion Loss) - DSX CableAnalyzer
Auto Save Results - DTX CableAnalyzer
TCL & ELTCTL - optional or required
Attenuation to Crosstalk Ratio Near-End (ACR-N) - DTX CableAnalyzer
Attenuation (Insertion Loss) Measurement and Testing - DTX CableAnalyzer
Marginal Pass/Fail Band - DTX CableAnalyzer
Margins are the same, but only one of them is reported as marginal - DTX CableAnalyzer
Shield integrity test - DSX CableAnalyzer
DC Resistance Unbalance within a pair - DSX CableAnalyzer